|
Saar
Lamintes high internal bond
strength gives high screw retention strength, both in
the face and edge over other types of panel products.
The following condition must be observed to obtain best
results.
* Use pilot hole, and it
should be slightly beyond the full depth of the screw
penetration.
* Do not use ordinary wood
screw.
* Do not hammer
screw.
* If screws are repeatedly
removed use plastic or metal sleevs.
*
Distance of the screw from the corner is to be 100 mm on
edge and 25 mm on face,
For best results direct
NAILING on boards is strictly not recommended.
Use
only long, full threaded screw and not partially
threaded ones.
|
